STP Diamond Line Aero Alum Car Soundproof - 1 Sheet
The material is 300 micrometres thick aluminium foil with printing and an adhesive mounting layer covered with antiadhesive film.
The material must be installed on dry clean painted metal surfaces, including complex surfaces. To clean the surface of dirt, it is recommended to use water with neutral abstergents, not containing organic solvents or alkali.
Upon dismantling, the material cannot be reused.
Preparation for Installation
In case the material is stored at temperature lower that 0°C, before use it must be kept at temperature (20±5°C for minimum 24h. The working space temperature must be (18-30) °C.
The mounting surface must be cleaned of dust and dirt, unoiled with technical solvents and kept until completely dry.
Anti-adhesive paper must be peeled of systematic, smoothly; the detail must be pressed to the surface, avoiding air blisters formation.
The material mustn’t be installed on dirty, corroded metal surfaces.