JBL S2-1024SS 10" (250mm) 1000W Slipstream Ported Enclosure Car Subwoofer
Series II enclosures deliver the enhanced efficiency and higher output of a vented enclosure, without the distracting noise or “chuffing” generated by a port. The patented Slipstream port dramatically reduces port noise at high sound pressure levels by minimizing airflow turbulence. With high-roll surrounds, proprietary cone design and long-excursion, Series II enclosures deliver deep, powerful bass, with greater accuracy than conventional ported boxes. And the exclusive SSI™ (Smart Selectable Impedance) switch lets you choose 2- or 4-ohm impedance for maximum configuration flexibility. It’s everything you want in a compact, easily installed enclosure.
Slipstream™ port design
At high sound pressure levels, air flow turbulence inside a vented enclosure’s port can create noise that soundslike woofer break up. The patented Slipstream port in Series II enclosures uses a double-flared design to minimize turbulence, and eliminate unwanted vortices.
SSI™ (Selectable Smart Impedance)
Most car audio system designs call for 2- or 4-ohm impedance. Series II subwoofers feature an exclusive dual impedance switch that lets you choose either load impedance option. Not available from any other manufacturer, SSI lets you reconfigure your system by simply flipping a switch.
Polypropylene Woofer Cone
We have molded a proprietary cone to ensure that there is minimal cone flex at the woofers excursion limits which keeps distortion low and output tight and deep.
JBL uses progressive spiders the Series II subwoofers to provide the best possible control at the excursion limits versus much more commonly used linear spiders. The benefit is a far more controlled woofer stroke with far tighter bass characteristics.
Stitched-In Tinsel Leads
We have stitched the tinsel leads right into spider to ensure long woofer life and minimize the chance of lead breakage. This feature is all about JBL building products that last.
We have vented the frame on the Series II subwoofers to keep the motor cool which gives you more power handling and a woofer that last.
Description: 10" (250mm) car audio subwoofer with SSI
Power Handling: 250W RMS, 1000W peak
Sensitivity (@ 2.83V): 92dB
Frequency Response: 30Hz – 175Hz Voice Coil Diameter: 2" (50mm)